Advantech ARK-7480 Installation of the 3.5 Hard Disk Drive HDD, Assemble HDD and HDD drive bay

4. Screw back the CF cover with three screws.

Note: The CompactFlash socket is allocated as Secondary IDE Master.

3.12 Installation of the 3.5" Hard Disk Drive (HDD)

You can attach one enhanced Integrated Device Electronics (IDE) hard disk drive to the ARK-7480's internal controller which uses a PCI local-bus interface. The advanced IDE controller supports faster data transfer and allows the IDE hard drive to exceed 528 MB. The following are instructions for installation:

1.Remove the power cord.

2.Unscrew the four screws from TOP cover of the ARK-7480. (Please refer to Figure 3.1)

3.Remove the TOP cover of the ARK-7480.

4.Unscrew the four screws from card depress bridge bracket. (Please refer to Figure 3.2)

5.Remove the card depress bridge bracket.

6.Assemble the hard disk into drive bay

Figure 3.11: Assemble HDD and HDD drive bay

31 Chapter3