Advantech ARK-7480 manual PnP/PCI Configurations, PCI Pirq A-D#, Reset Configuration Data

4.7.16 FDD, COM, LPT PORT

When Enabled, the system will resume from suspend mode if FDD, COM port, or LPT port is active. The choice: Enabled, Disabled.

4.7.17 PCI PIRQ [A-D]#

When Enabled, the system will resume from suspend mode if interrupt occurs. The choice: Enabled, Disabled.

4.8 PnP/PCI Configurations

This section shows how to configure the PCI bus system. It covers some very technical items and it is strongly recommended that only experi- enced users should make any changes to the default settings.

Figure 4.11: PnP/PCI configurations screen

4.8.1 Reset Configuration Data

Default is Disable. Select Enable to reset Extended System Configuration Data (ESCD) if you have installed a new add-on and system e configura- tion has caused such a conflict that OS cannot boot.

4.8.2 Resources controlled by:

The commands here are “Auto” or “Manual.” Choosing “manual” requires you to choose resources from each following sub-menu. “Auto”

ARK-7480 User Manual 60