Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
deadtime
deadtime (server-group configuration)
To configure the deadtime value at the RADIUS server group level, use the deadtime command in
deadtime minutes no deadtime
Syntax Description | minutes | Length of time, in minutes, for which a RADIUS server is skipped over by |
|
| transaction requests, up to a maximum of 1440 (24 hours). The range is |
|
| from 1 to 1440. |
|
|
|
Defaults
Command Modes
Command History
Usage Guidelines
Deadtime is set to 0.
ReleaseModification
Release 3.3.0 | This command was introduced on the Cisco |
| Cisco XR 12000 Series Router. |
|
|
To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
The value of the deadtime set in the server groups overrides the deadtime that is configured globally. If the deadtime is omitted from the server group configuration, the value is inherited from the master list. If the server group is not configured, the default value of 0 applies to all servers in the group. If the deadtime is set to 0, no servers are marked dead.
Task ID |
| Task ID | Operations |
|
| aaa | read, write |
|
|
| |
|
|
|
|
Examples |
| The following example specifies a | |
|
| failed to respond to authentication requests for the deadtime command: | |
RP/0/RP0/CPU0:router# configure RP/0/RP0/CPU0:router(config)# aaa group server radius group1
Cisco IOS XR System Security Command Reference
