Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software

aaa default-taskgroup

aaa default-taskgroup

To specify a task group to be used for both remote TACACS+ authentication and RADIUS authentication, use the aaa default-taskgroupcommand in global configuration mode. To remove this default task group, enter the no form of this command.

aaa default-taskgroup taskgroup-name

no aaa default-taskgroup

Syntax Description

 

taskgroup-name

Name of an existing task group.

 

 

 

 

Defaults

 

No default task group is assigned for remote authentication.

Command Modes

Command History

Global configuration

Release

Modification

Release 3.2

This command was introduced on the Cisco CRS-1 and

 

Cisco XR 12000 Series Router.

 

 

Release 3.3.0

No modification.

 

 

Usage Guidelines

 

To use this command, you must be in a user group associated with a task group that includes the proper

 

 

task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on

 

 

Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

 

 

Use the aaa default-taskgroupcommand to specify an existing task group to be used for remote

 

 

TACACS+ authentication.

 

 

 

 

 

 

 

Task ID

 

Task ID

Operations

 

 

 

 

 

 

 

 

aaa

read, write

 

 

 

 

 

 

 

 

 

Examples

 

The following example shows how to specify taskgroup1 as the default task group for remote TACACS+

 

 

authentication:

 

 

RP/0/RP0/CPU0:router# configure

RP/0/RP0/CPU0:router(config)# aaa default-taskgroup taskgroup1

Cisco IOS XR System Security Command Reference

SR-12

Page 12
Image 12
Cisco Systems XR manual Aaa default-taskgroup, SR-12