Cisco Systems XR manual Inherit taskgroup, SR-27

Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software

inherit taskgroup

inherit taskgroup

To enable a task group to derive permissions from another task group, use the inherit taskgroup command in task group configuration mode.

inherit taskgroup {taskgroup-name netadmin operator sysadmin cisco-support root-lr root-system serviceadmin}

Syntax Description	taskgroup-name	Name of the task group from which permissions are inherited.
	netadmin	Inherits permissions from the network administrator task group.
	operator	Inherits permissions from the operator task group.
	sysadmin	Inherits permissions from the system administrator task group.
	cisco-support	Inherits permissions from the cisco support task group.
	root-lr	Inherits permissions from the root-lr task group.
	root-system	Inherits permissions from the root system task group.
	serviceadmin	Inherits permissions from the service administrators task group.

Defaults

Command Modes

Command History

No default behavior or values

Task group configuration

Release	Modification
Release 2.0	This command was introduced on the Cisco CRS-1.
Release 3.0	No modification.
Release 3.2	This command was supported on the Cisco XR 12000 Series Router.
Release 3.3.0	The serviceadmin keyword was added.

Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

Use the inherit taskgroup command to inherit the permissions (task IDs) from one task group into another task group. Any changes made to the taskgroup from which they are inherited are reflected immediately in the group from which they are inherited.

Task ID	Task ID	Operations
	aaa	read, write

Cisco IOS XR System Security Command Reference

SR-27