Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software
aaa group server tacacs+
aaa group server tacacs+
To group different TACACS+ server hosts into distinct lists, use the b command in global configuration mode. To remove a server group from the configuration list, enter the no form of this command.
aaa group server tacacs+
no aaa group server tacacs+
Syntax Description
Defaults
Command Modes
Command History
Character string used to name a group of servers. | |
|
|
This command is not enabled.
Global configuration
Release | Modification |
Release 2.0 | This command was introduced on the Cisco |
|
|
Release 3.0 | No modification. |
|
|
Release 3.2 | This command was supported on the Cisco XR 12000 Series Router. |
|
|
Release 3.3.0 | No modification. |
|
|
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
The AAA
The aaa group server tacacs+ command enters server group configuration mode. The server command associates a particular TACACS+ server with the defined server group.
A server group is a list of server hosts of a particular type. The supported server host type is TACACS+ server hosts. A server group is used with a global server host list. The server group lists the IP addresses or hostnames of the selected server hosts.
The server group cannot be named radius or tacacs.
Note Group name methods refer to a set of previously defined TACACS+ servers. Use the
Task ID | Task ID | Operations |
| aaa | read, write |
|
|
|
Cisco IOS XR System Security Command Reference
