Authentication, Authorization, and Accounting Commands on CiscoIOS XR Software
show radius
SR-60
Cisco IOS XR System Security Command Reference
show radius
Todisplay information about the RADIUS servers that are configured in the system, use the show radius
command in EXEC mode.
show radius
Syntax Description This command has no arguments or keywords.
Defaults If no radius servers are configured, no output is displayed.
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the ConfiguringAAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show radius command to display statistics for each configured RADIUS server.
Task ID
Examples The following sample output is for the show radius command:
RP/0/RP0/CPU0:router# show radius
Global dead time: 0 minute(s)
Server: 1.1.1.1/1/2 is UP
Timeout: 5 sec, Retransmit limit: 3
Authentication:
0 requests, 0 pending, 0 retransmits
0 accepts, 0 rejects, 0 challenges
0 timeouts, 0 bad responses, 0 bad authenticators
0 unknown types, 0 dropped, 0 ms latest rtt
Accounting:
0 requests, 0 pending, 0 retransmits
0 responses, 0 timeouts, 0 bad responses
0 bad authenticators, 0 unknown types, 0 dropped
0 ms latest rtt
Release Modification
Release 3.3.0 This command was introduced on the Cisco CRS-1 and
Cisco XR 12000 Series Router.
Task ID Operations
aaa read