Authentication, Authorization, and Accounting Commands on CiscoIOS XR Software
show radius server-groups
SR-70
Cisco IOS XR System Security Command Reference
show radius server-groups
Todisplay information about the RADIUS server groups that are configured in the system, use the show
radius server-groupscommand in EXEC mode.
show radius server-groups
Syntax Description This command has no arguments or keywords.
Defaults No default behavior or values
Command Modes EXEC
Command History
Usage Guidelines To use this command, you must be in a user group associated with a task group that includes the proper
task IDs. For detailed information about user groups and task IDs, see the ConfiguringAAA Services on
Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.
Use the show radius server-groupscommand to display information about each configured RADIUS
server group, including the group name, numbers of servers in the group, and a list of servers in the
named server group. A global list of all configured RADIUS servers, along with authentication and
accounting port numbers, is also displayed.
Task ID
Examples The inherited global message is displayed if no group leveldeadtime is defined for this group; otherwise,
the group leveldeadtime value is displayed and this message is omitted. The following sample output is
for the show radius server-groupscommand:
RP/0/RP0/CPU0:router# show radius server-groups
Global list of servers
Contains 1 servers
Server 12.26.49.12/11000/11001
Server group 'radgroup' has 1 servers
Dead time: 0 minute(s) (inherited from global)
Contains 1 servers
Server 12.26.49.12/11000/11001
Release Modification
Release 3.2 This command was introduced on the Cisco CRS-1 and
Cisco XR 12000 Series Router.
Release 3.3.0 No modification.
Task ID Operations
aaa read