Authentication, Authorization, and Accounting Commands on Cisco IOS XR Software

radius-server retransmit

radius-server retransmit

To specify the number of times the Cisco IOS XR software retransmits a packet to a server before giving up, use the radius-server retransmit command in global configuration mode. To disable retransmission, use the no form of this command.

radius-server retransmit retries

no radius-server retransmit

Syntax Description

 

retries

Maximum number of retransmission attempts. The range is from 1 to 100. Default is 3.

 

 

 

 

Defaults

 

The RADIUS servers are retried three times, or until a response is received.

Command Modes

Command History

Global configuration

Release

Modification

Release 3.2

This command was introduced on the Cisco CRS-1 and

 

Cisco XR 12000 Series Router.

 

 

Release 3.3.0

No modification.

 

 

Usage Guidelines

 

To use this command, you must be in a user group associated with a task group that includes the proper

 

 

task IDs. For detailed information about user groups and task IDs, see the Configuring AAA Services on

 

 

Cisco IOS XR Software module of the Cisco IOS XR System Security Configuration Guide.

 

 

The RADIUS client tries all servers, allowing each one to time out before increasing the retransmit

 

 

count.

 

 

 

 

 

 

 

Task ID

 

Task ID

Operations

 

 

 

 

 

 

 

 

aaa

read, write

 

 

 

 

 

 

 

 

 

Examples

 

The following example shows how to specify a retransmit counter value of five times:

 

 

RP/0/RP0/CPU0:router# configure

 

 

RP/0/RP0/CPU0:router(config)# radius-server retransmit 5

Cisco IOS XR System Security Command Reference

SR-46

Page 46
Image 46
Cisco Systems XR manual Radius-server retransmit, SR-46