Manuals / Panasonic / Photography / Digital Camera

Panasonic DMC-XS1GN, DMC-XS1P Flash-ROM Data Backup, Light Box, Rombackup Method of Non-PC backup

Models: DMC-XS1PU DMC-XS1EE DMC-XS1GC DMC-XS1GN DMC-XS1P DMC-XS1EB DMC-XS1EP DMC-XS1GK DMC-XS1GF DMC-XS1GA DMC-XS1GT DMC-XS1EF DMCXS1K DMC-XS1PC DMC-XS1EG

1 39

Download 39 pages 11.22 Kb

Page 30

9.2.2.Flash-ROM Data Backup

Number of necessary adjustment items decreases by copying the backup data to new Main P.C.B. when adjustment data in old Main P.C.B. is usually read by ROM_BACKUP “DSC→SD”.

It is recommended to backup the Flash-ROM data as the way of return when trouble occurs before disassembling the unit depend- ing on each case.

[ ROM_BACKUP (Method of Non-PC backup) ]

1.Insert the memory card into the camera.

2.Set the camera to “Temporary cancellation of the initial settings”.

3.Select the “SETUP” menu.

From the “SETUP” menu, select “ROM_BACKUP”.

NOTE:

This item is not listed on the customer's “SETUP” menu.

4.When this “ROM_BACKUP” item is selected, the following submenus are displayed.

Fig.2-1

[ DSC Integrated Assist Software (Method of Using PC) ] Same as TATSUJIN software for previous models.

9.2.3.Light Box

If using VFK1164TDVLB Light Box, remove the lens connection ring by loosing three hexagon screws.

Fig.2-2

30

Image 30

Panasonic DMC-XS1GN, DMC-XS1GF, DMC-XS1GC, DMC-XS1PU Flash-ROM Data Backup, Light Box, Rombackup Method of Non-PC backup

Contents

Model No. DMC-XS1P Table of Contents Leakage Current Cold Check Safety PrecautionsGeneral Guidelines Leakage Current Hot Check See Figure How to Discharge the E.Capacitor on Flash Top P.C.B Fig. F1 How to Recycle the Lithium Ion Battery U.S. Only Service Navigation Introduction Important Notice Recommended Lead Free Solder Service Parts Route General Description About Lead Free Solder PbF How to Define the Model Suffix Ntsc or PAL model Defining methods Temporary cancellation of Initial Settings Cancellation of Initial SettingsTurn the Power on Turn the Power on Display the Initial Setting Choose the model suffix in Initial Settings Refer to Caution Default setting After Initial Settings Confirmation Specifications Location of Controls and Components Page How to display Service ModeError Code Memory Function Execute the error code display mode Error Code List Important notice about Error Code List About * indication How to exit from Error Code display modeAbout ? indication 18*0 0?01 to 18*0 0?60 Service Fixture & Tools Service Fixture and ToolsWhen Replacing the Main P.C.B Service Position Disassembly and Assembly Instructions Disassembly Flow ChartP.C.B. Location Disassembly Procedure Removal of the Rear Case Unit Removal of the Rear Op Plate Unit Fig. D2 Removal of the Front Case Unit Removal of the LCD Unit Fig. D4 Removal of the Frame Plate Removal of the Top Case Unit Removal of the Main P.C.B. Speaker Fig. D12 Removal of the Battery Door Unit Fig. D13 Removal of the CCD FPC Unit Fig. D14 Introduction Measurements and AdjustmentsInitial Setting Release Before Disassembling the unit Flash-ROM Data Backup Rombackup Method of Non-PC backupLight Box Startup Electrical Adjustment mode Details of Electrical AdjustmentHow to execute the Electrical Adjustment Status Adjustment Flag Setting Execute Adjustment Case of OIS Adjustment Finalizing the Adjustment Adjustment Specifications Page After Adjustment Initial Setting Maintenance Cleaning Lens and LCD Panel Block Diagram Overall Block Diagram Flash / Top Block Diagram Sub Operation Block Diagram Wiring Connection Diagram Interconnection Diagram