Displaying the status and result of positioning

The icons that indicate the status and result of positioning will appear on the LCD monitor. When the camera successfully executes positioning, it records the current location and displays the place name information on the screen.

GPS reception icon

Place name information

The same number of icons as the

Positioning

executed

number of the GPS satellites (from

successfully

which radio signals are successfully

 

received) stop flashing and light (blue).

 

If the three bars of the GPS reception

 

icon do not light and the icon turns

 

off, it means that positioning was

 

unsuccessful.

 

Positioning result icons

(Time elapsed after successful positioning) (minute)

: No positioning information has been acquired.

●●Positioning will take time in environments where it is difficult to receive the signals from the GPS satellites. For details, refer to “Using the GPS function to record the location of a picture” (Owner’s Manual for advanced features).

●●Even if GPS reception is good, it will take approx. 2 to 3 minutes to successfully execute positioning under the following conditions; when positioning is executed for the first time, or when positioning is executed after the camera is turned off with the [GPS Setting] set to [OFF] or [Airplane Mode] set to [ON], and then turned on again.

(ENG) VQT4B72 23

Page 23
Image 23
Panasonic DMC-ZS19, DMC-ZS20 owner manual Displaying the status and result of positioning, GPS reception icon