12 VQT2L60 (ENG) (ENG) VQT2L60 13
Inserting and removing the card (optional)/the battery■To remove
•To remove battery:
move lever in direction of arrow.
•To remove card:
press down in center.
Lever
●Always use genuine Panasonic batteries (DMW-BCG10PP).
●If you use other batteries, we cannot guarantee the quality of this
product.
●The card may be damaged if it is not fully inserted.
●Keep the Memory Card out of reach of children to prevent swallowing.
Set the camera ON/OFF switch
to OFF and slide the release
lever ( A) to [OPEN] before
opening the lid
Completely insert battery and
card
• Battery: Push in until the lever is locked.
• Memory card: Push in until it clicks.
B Do not touch terminal.
C Check orientation.
Close lid
Slide to the [LOCK] position.
Picture save destination (cards and built-in memory)
■Built-in memory (approx. 15 MB)
●
The built-in memory can be used as a temporary storage device when the
card being used becomes full.
●
The access time for the built-in memory may be longer than the access time
for a card.
■Compatible memory cards (optional)
The following SD standard-based cards
(Panasonic brand recommended)
Type of Card Capacity Notes
SD memory
cards
8 MB – 2 GB
• Can be used with devices
compatible with the
respective formats.
• Before using SDXC memory
cards, check that your
computer and other devices
support this type of card.
http://panasonic.net/avc/
sdcard/information/SDXC.
html
• Cards in capacities not listed
at left are not supported.
SDHC memory
cards
4 GB – 32 GB
SDXC memory
cards
48 GB – 64 GB
●If the write-protect switch is set to ‘LOCK’, the card cannot be used to
record or delete pictures, and it cannot be formatted.
●Latest information:
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
Switch (LOCK)
[OPEN] [LOCK]
B
C
A