![](/images/new-backgrounds/1251121/25112167x1.webp)
PROCEDURE 7 | RETAINING STRAP | |
|
|
|
R E T A I N I N G
S
This Procedure Includes the Following:
Replacing Battery Box Retaining Strap
WARNING
AfterANYadjustments,repairorserviceandBEFORE use, make sure all attaching hardware is tightened securely - otherwise injury or damage may result.
REPLACING BATTERY BOX RETAINING STRAP
All MWD Models and FWD Model RANGER IIJR (FIGURE 1)
7.Install the battery boxes onto the wheelchair. Refer to one (1) of the following:
FWD WHEELCHAIRS - INSTALLING/REMOVING BATTERYBOXESinPROCEDURE11ofthismanual.
MWD WHEELCHAIRS - INSTALLING/REMOVING BATTERYBOXESinPROCEDURE12 ofthismanual.
WARNING
The Battery Box Retaining Strap MUST be fastened securely and adjusted properly to hold battery boxes in place before using the wheelchair. Oth- erwise, injury to the user and/or damage to the wheelchair may occur.
T R A
1. If necessary, remove the front and rear shrouds. Refer | 8. If necessary, install the front and rear shrouds. Refer | |
to REMOVING/INSTALLING SHROUDS in PROCE- | ||
to REMOVING/INSTALLING SHROUDS in PROCE- | ||
DURE 9 of this manual. | ||
DURE 9 of this manual. |
|
P
2.Remove the battery boxes from the wheelchair. Refer to one (1) of the following:
FWD WHEELCHAIRS - INSTALLING/REMOVING BATTERYBOXESinPROCEDURE11ofthismanual.
MWD WHEELCHAIRS - INSTALLING/REMOVING BATTERYBOXESinPROCEDURE12ofthismanual.
WARNING
The retaining strap MUST be fed through the ad- justable end of the battery box retaining strap clip as shown in FIGURE 1.
3.Feedtheexistingbatteryboxretainingstrapthroughthe adjustable end of the battery box retaining strap buckle.
4.Feed the existing battery box retaining strap through the slot in the battery box tray.
5.Feed the new battery box retaining strap through the inside of the slot in the battery box tray.
6.Feed the new battery box retaining strap through the adjustableendofthebatteryboxretainingstrapbuckle.
NOTE: Strap should have
Adjustable |
| |
End | Retaining | |
|
| |
|
| Strap Buckle |
Retaining |
|
|
Strap |
| |
| Minimum |
|
|
| Slot |
|
| Battery Box Tray |
NOTE: Tray shown by itself for clarity. There is no need to remove the tray from the wheelchair if the retaining strap is being replaced.
NOTE: RANGER IIJR battery tray not shown for clarity. Retaining strap removes/installs in the same manner.
FIGURE 1 - REPLACING BATTERY BOX RETAINING STRAP - ALL MWD MODELS AND FWD MODEL - RANGER IIJR
34