Invacare II250 SERIES, IIJR, IIBASIC, IISTANDARD manual Functional Reach From a Wheelchair

GENERAL GUIDELINES PROCEDURE 1

FACTORY SETTINGS - MOTOR MOUNTING POSITIONS

(MOTORS WITH MOTOR LOCKS)

SEAT		SEAT DEPTH
WIDTH	16	17	18
*14	N/A	N/A	N/A
16	FRONT	FRONT	FRONT
18	FRONT	FRONT	FRONT
20	FRONT	FRONT	FRONT

FIGURE 1 shows the motor mounting positions.

FRONT MOTOR

MOUNTING POSITION

G E N E R A L

FACTORY SETTINGS - MOTOR MOUNTING POSITIONS

(MOTORS WITH CLUTCHES)

SEAT		SEAT DEPTH
WIDTH	16	17	18
*14	REAR	REAR	REAR
16	MIDDLE	MIDDLE	MIDDLE
18	MIDDLE	MIDDLE	MIDDLE
20	MIDDLE	MIDDLE	MIDDLE

USERS' WEIGHT 200 LBS AND UNDER -

MOTOR MOUNTING POSITIONS

SEAT		SEAT DEPTH
WIDTH	16	17	18
*14	REAR	REAR	REAR
16	REAR	REAR	REAR
18	REAR	REAR	REAR
20	REAR	REAR	REAR

USERS' WEIGHT 201 TO 250 LBS -

MOTOR MOUNTING POSITIONS

SEAT		SEAT DEPTH
WIDTH	16	17	18
*14	N/A	N/A	N/A
16	MIDDLE	MIDDLE	MIDDLE
18	MIDDLE	MIDDLE	MIDDLE
20	MIDDLE	MIDDLE	MIDDLE

USERS' WEIGHT 251 TO 300 LBS

(FWD MOTORS WITH MOTOR LOCKS ONLY)-

MOTOR MOUNTING POSITIONS

SEAT		SEAT DEPTH
WIDTH	16	17	18
*14	N/A	N/A	N/A
16	FRONT	FRONT	FRONT
18	FRONT	FRONT	FRONT
20	FRONT	FRONT	FRONT

MIDDLE MOTOR

MOUNTING POSITION

REAR MOTOR

MOUNTING POSITION

FIGURE 1 - PERCENTAGE OF WEIGHT DISTRIBUTION -

FWD WHEELCHAIRS ONLY

Functional Reach From a Wheelchair

The approximate reach-limit values shown in the accompa- nying graphs were derived on the basis of a sample of 91 male and 36 female wheelchair users. Note the difference between the maximum and the comfortable reach limits, a subjective but important consideration in design.

G U I D E L I N E S

*NOTE: 14 wide is only for RANGER IIJR.

Reaching, Leaning, Bending and Bending -

Forward

Position the rear casters so that they are extended as far rearward as possible and engage motor locks/ clutches. DO NOT ATTEMPT TO REACH OBJECTS

IF YOU HAVE TO MOVE FORWARD IN THE SEAT

OR PICK THEM UP FROM THE FLOOR BY REACH-

ING DOWN BETWEEN YOUR KNEES.

11