PROCEDURE 3 | FRONT RIGGINGS |
F R O N T
R
I
G G I N G S
| DETAIL “A” |
|
Height Adjustment | Flat | Nut |
Bracket | Washer |
|
Caplug |
|
|
Washer |
|
|
|
| Two (2) Large |
|
| Washers |
Mounting
Screw
Caplug
Cap
Footboard | Support Tube | |
Bracket | ||
|
PREPARING REMOVABLE FOOTBOARD FOR WHEELCHAIR TRANSPORTATION (FIGURE 12)
Removing The Removable Footboard Plate
1.Depress the push pins on the two (2) support tubes on the removable footboard plate.
2.While performing STEP 1, grasp the removable footboard plate and pull it away from the two (2) sup- port tubes on the removable footboard mounting brackets.
Installing The Removable Footboard Plate
1.Align the two (2) support tubes on the removable footboard plate with the two (2) support tubes on the removable footboard mounting brackets.
2.Push the two (2) support tubes on the removable footboard plate onto the two (2) support tubes on the removable footboard mounting brackets, until the push pins release into the adjustment holes.
WARNING
Makesurethepushpinsarefullyprotrudingthrough theadjustmentholesBEFOREusingthewheelchair. Otherwise, injury or damage can occur.
DETAIL “B”
Footboard Bracket | Flat | Nut |
Washer |
| |
|
| |
|
| Mounting |
|
| Positions |
Height |
|
|
Adjustment |
|
|
Bracket |
|
|
Threaded |
| |
| Arm |
|
NOTE: Only MWD footboard bracket shown for clar- ity. The footboard bracket on the FWD model adjusts in the same manner.
FIGURE 11 - ADJUSTING THE
REMOVABLE FOOTBOARD HEIGHT
3. Make sure the push pins are completely released.
Pull Removable | Removable |
Footboard Plate Away | |
Support Tube | Footboard Plate |
| |
Removable | Push |
Footboard | Pin |
Mounting |
|
Bracket |
|
| Adjustment |
| Hole |
Support
Tube
NOTE: Bottom view of wheelchair/footboard shown for clarity.
FIGURE 12 - PREPARING REMOVABLE FOOTBOARD
FOR WHEELCHAIR TRANSPORTATION
26
