PROCEDURE 9 | SHROUDS |
S H R O U D S
FWD Wheelchairs (FIGURE 2)
REMOVING FRONT SHROUD.
1.Unclip the retaining strap securing the front shroud and battery box to the wheelchair.
2.Feed the retaining strap through the front shroud.
3.Remove the front shroud from the wheelchair.
INSTALLING FRONT SHROUD.
1.Feed the retaining strap through the front shroud as shown in FIGURE 2.
2.Position the bottom of the front shroud between the battery box and the battery tray.
3.Clip the retaining strap together.
4.Pull end of retaining strap to secure front battery box and front shroud in place.
REMOVING REAR SHROUD.
1.Peform one (1) of the following:
A.For 16,18, and
l Unclip the retaining strap securing the rear shroud and battery box to the wheelchair.
l Feed the retaining strap through the rear shroud.
l Remove the rear shroud from the wheel- chair.
B.For
l Lift up on rear shroud and remove from wheelchair.
INSTALLING REAR SHROUD.
1.Peform one (1) of the following:
A.For 16,18, and
l Feed the retaining strap through the front shroud as shown in FIGURE 2.
l Clip the retaining strap together.
lPress down on the rear shroud until the two
(2) clips secure the rear shroud to the two (2) side shrouds.
lPull end of retaining strap to secure rear bat- tery box and front shroud in place.
B.For
lAlgin clips of rear shroud with tabs on side shrouds.
lPress down on rear shroud until the two clips and dual lock fastener secure the rear shroud in place.
40
