Panasonic DMCTS20K, DMCTS20D Crash resistance, Perfomance, Under all conditions, Dustproof, Input

Crash resistance	The test method of the camera is in compliance with
perfomance	“MIL-STD 810F Method 516.5-Shock”¢.
	¢ “MIL-STD 810F Method 516.5-Shock” is the test method
	standard of the U.S. Defense Department, which specifies
	performing drop tests from a height of 122 cm (4 feet), at 26
	orientations (8 corners, 12 ridges, 6 faces) using 5 sets of
	devices, and passing the 26 orientation drops within 5
	devices.
	(If failure occurs during the test, a new set is used to pass the
	drop orientation test within a total of 5 devices)
	• Panasonic’s test method is based on the above “MIL-STD 810F
	Method 516.5-Shock”. However, the drop height was changed
	from 122 cm (4 feet) to 150 cm (5 feet) dropping onto 3 cm
	(0.1 feet) thick plyboard. This drop test was passed.
	(Disregarding appearance change such as loss of paint or
	distortion of the part where drop impact is applied.)
	There is no guarantee of not breaking or malfunctioning
	under all conditions.
Dustproof	Equivalent to IEC 60529 “IP6X”.
performance

Battery Charger (Panasonic DE-A91B):

Information for your safety

Input:	110 V to 240 V, 50/60 Hz, 0.2 A
Output:		4.2 V, 0.43 A

Operating

temperature: 0 oC¢ to 40 oC (32 oF¢ to 104 oF)

¢The battery cannot be recharged in a temperature less than 0 oC (32 oF). (The [CHARGE] indicator blinks when the battery cannot be recharged.)

Equipment mobility:

Movable

Battery Pack (lithium-ion) (Panasonic DMW-BCK7PP):

Information for your safety

Voltage/capacity: 3.6 V/680 mAh

24 VQT4A80 (ENG)