VQT4A80 (ENG)
12
1Check that there are no foreign objects on the in ner side of the side door.
ABrush (supplied)
BSide door
•If there is any foreign object, such as
lint, hair, sand, etc., on the
surrounding area, water will leak
within a few seconds causing
malfunction.
•Wipe it off with a dry soft cloth if there
is any liquid.
It may cause water leaks and
malfunction if you use the camera
with liquid adhered.
•If there is any foreign material,
remove with supplied brush.
•Be extremely careful to remove the small sand etc. that may adhere to the sides and
corners of the rubber seal.
•Remove large foreign objects, wet sand, etc., using the shorter (harder) side of the
brush.
2Check for cracks and deformation of the ru bber seal on the side door.
•The integrity of the rubber seals may decrease after about 1year, with use and age. To
avoid permanently damaging the camera, the seals should be replaced once each
year. Please contact Panasonic’s Service Center for related costs and other
information.
3Close the side door securely.
C[LOCK] switch (gray part)
DRed part
EReleased state
FLocked state
•Lock the [LOCK] switch securely until
the red part is no longer visible.
•To prevent water seeping into the
camera, be careful not to trap foreign
objects such as liquids, sand, hair or
dust, etc.
Check before using underwater
Do not open or close the side door i n pl ace s wit h sa nd a nd du st, c lo se t o wat er,
or with wet hands. Sand or dust adhering may cau se water leaks.
ロヰヤレ
ロヰヤレ
ロヰヤレ