¾HDMI Colour Mode
This setting is for selecting
¾Deep Colour Output
This setting is for selecting whether to use Deep Colour output when a TV that supports Deep Colour is connected.
¾Contents Type Flag
Depending on the playback content, the TV will output adjusting to the optimal method when a TV that supports this function is connected.
¾HDMI(SUB) Output Mode [BDT330]
Set to output the video from the HDMI AV OUT SUB terminal or not.
Sound
∫Dialogue Enhancer 
(> 29)
∫Dynamic Range Compression
You can listen at low volumes but still hear dialog clearly.
(Dolby Digital, Dolby Digital Plus and Dolby TrueHD only)
≥“Automatic” is effective only when playing Dolby TrueHD.
∫Digital Audio Output
Press [OK] to show the following settings:
¾Dolby D/Dolby D +/Dolby TrueHD
¾DTS/DTS-HD
Select the audio signal to output.
≥Select “PCM”, when the connected equipment cannot decode the respective audio format. This unit decodes the audio format and transmits to the connected equipment.
≥Not making the proper settings may result in noise.
¾BD-Video Secondary Audio
Select whether or not to mix the primary and secondary audio (including the button click sound).
If “Off” is selected, the unit outputs the primary audio only.
¾HDMI Audio Output
This setting selects whether or not to output audio from HDMI.
≥Select “Off” when the TV is connected to this unit via HDMI AV OUT terminal, and this unit is also connected to other devices, such as an amplifier/receiver via an OPTICAL terminal.
Settings
VQT4W95 31
