11
RQT6981
Setting up
SD/PC card and still pictures
§1A PC card adapter conforming to PC card standards is necessary.
§2Can only play still pictures and save to DVD-RAM.
§3Content saved on SD media storage (SV-PT1).
≥Compatible with:FAT 12 or FAT 16
(Mobile hard disk is also FAT 32 compatible)
≥Use this unit to format a memory card when using for the first time
(➜page 36). Note that the memory card may no longer be usable
on other equipment once formatted on this unit.
≥This unit operates in accordance with the Digital Print Order
Format (➜page 36, DPOF). (Card only)
≥Only use the memory cards recommended above.
∫Regarding Write Protect
For cards that have a write protect switch, if the switch is on it will
not be possible to write, erase or format the card.
∫The card indicator (“SD” or “CARD”) on the dis-
play
Only insert or remove the SD/PC card after turning the
unit off.
The indicator flashes when the data is being written to or read from
the card. Do not turn off the power or remove the card at such a
time. Should you do so, the unit may malfunction or the contents of
the card may be damaged.
≥The unit can play DCF§ compliant JPEG and TIFF files taken on a
digital camera.
§Design rule for Camera File system: unified standard established
by Japan Electronics and Information Technology Industries
Association (JEITA).
≥Picture definition:
Compatible in the range 320 k 240 – 6144 k 4096 (sub sampling
is 4:2:2 or 4:2:0)
≥This unit can handle a maximum of 300 folders (including header
folders) and 3,000 files. Files and folders with numbers which
exceed the maximum cannot be displayed, copied or erased.
≥Audio, video and still pictures (MOTION JPEG etc.) that are not
compliant with the DCF standard and still pictures other than
JPEG and TIFF cannot be displayed.
≥Still pictures created or edited on a computer may not be playable.
≥TIFF is compatible with uncompressed RGB chunky formats.
Other types of TIFF files cannot be played.
≥When playing TIFF files, it may take time for them to be displayed.
≥When there are a lot of folders and files, it may take a long time to
display, copy or erase.
≥Folder titles that were input on equipment other than this unit may
not be displayed properly.
Cards capable of displaying and saving
SD card slot
≥SD Memory Card
≥Multi Media Card
PC card slot
≥SD Memory Card§1
≥Multi Media Card§1
≥Compact Flash§1
≥Smart Media§1
≥Memory Stick§1
≥xD picture card§1
≥Micro drive§1§2
≥ATA Flash PC card
≥Mobile hard disk§2§3
Still pictures
Still picture folder structure
The following can be displayed on this unit.
≥Folders below including still pictures within these folders
cannot be displayed or saved.
e.g.,
§Folders can be created on other equipment. However, these
folders cannot be selected as a copy destination.
≥
The folder cannot be displayed if the
numbers are all “0” (e.g.,
DCIM000 etc).
XXXXXXXX.JPG
XXXXXXXX.JPG
XXXXXXXX.JPG
XXXXXXXX.JPG
Press [:, 9] to change between folders.
Press [:, 9]
to change between folders.
Card
IM¢CDPF or IMEXPORT
DCIM
¢¢¢XXXXX
¢¢¢XXXXX
DCIM¢¢¢
¢¢¢ : Numbers
DVD-
RAM
XXX
JPEG
XXXXXXXX.JPG
Or
XXXXXXXX.TIF
: Letters
XXXXXXXX.JPG
XXXXXXXX.JPG
XXXXXXXX.JPG
XXXXXXXX.JPG
¢¢¢XXXXX
DCIM
XXXXXXXX.JPG
XXXXXXXX.JPG
Still picture file
§
§