Quick Set Up: Timer Recording.
(DMR-ES10, E55 & ES30)
5.* First select the Channel you wish to record, this is the “Name” section of the
menu, use the 
to select the correct channel.
*Next use the 
to select the start time of the programme, use the 
to scroll, by holding down the button will move the time in 30min increments by pressing it once will move it 1min at a time.
*Next only applies to recorders with
a hard drive. Use the 
to select
“HDD/DVD” use the 
to select the format that the unit will record in.
*Next use the 
to select the
date, use the 
to select correct date.
*Next use the 
to select the stop time of the recorder, use the
to select the time the recorder will finish recording.
*Next use 
select the “Mode”. Use the 
to select the speed the unit will record at.
6.If all the information on the screen is correct press the timer button
. The unit will then go into the standby mode waiting for the time for it to start recording.
This is a basic guide to set up one off timer recordings for more advanced timer functions and information please consult your operating instructions, for more information please check out the FAQ section on our website www.panasonic.om.au .
