Names and Functions of Components
4 | 18 | 2 | 3 | 4 | 1 |
17 | 6 | 7 | 19 |
1HDMI connection terminal Connects to the digital camera’s HDMI connector.
2Electrical contacts
3 Interface contacts
4 Camera attachment pins
5 Attachment screw
6Screw hole
Attaches to PL lens compatibility adapters, etc.
7HDMI terminal
HDMI Type A output terminal. (VIERA Link is not supported.) yyUse a
8DC IN terminal
Connects to the DC power supply (battery: 12 V DC).
|
| Pin no. | Signal | |
1 2 3 | 4 | 1 | GND | |
2, 3 | — | |||
| ||||
|
| 4 | 12 V | |
|
| CASE | Frame GND |
14 | 5 14 | 11 | 8 |
16 | 15 12 | 13 | 12 18 | 9 | 10 |
Notes on DC power supply (battery) yVerify that the output voltage matches the
unit’s voltage rating before connection. yyUse a rated output current that is equal to or higher than the unit’s input current
rating.
yyUse a shielded cable that is less than 2 m in length for the DC cable connecting the unit to the DC power supply (battery).
yyAn inrush current is generated when the digital camera is turned on. An insufficient power supply capacity when the power is turned on may result in malfunction. We recommend using a DC power supply (battery) that can provide at least twice the power consumption value of the unit.
Verify the pin positions of the output connector of the DC power supply (battery) and the unit’s DC IN terminal, and be sure to connect with the correct polarities.
Connecting +12 V power to the GND terminal may result in fire or malfunction.
8VQT5K48 (ENG)
