Additional Menus
When the unit is mounted on the digital camera, an additional menu will appear in the digital camera’s display.
Be sure to read the digital camera’s manual together with this document. yyMenu settings are registered to the digital camera when you turn it off.
Motion Picture
Interface Unit | Settings for the interface unit | ||
|
|
| |
|
| Select the audio to input to the digital camera. | |
|
| yy[BODY]: | |
|
| Input audio from the digital camera’s internal microphone or from the | |
| Audio Input Select | external microphone connected to the digital camera. | |
| yy[XLR]: |
| |
|
| Input audio from the equipment connected to this unit’s AUDIO IN | |
|
| [CH1, CH2] terminals. | |
|
| When this is selected, the [Lens Noise Cut] setting will be fixed at | |
|
| [OFF]. |
|
|
|
| |
| SDI Remote | Select whether to output control information for recording start/stop to | |
| the external equipment connected to this unit’s SDI OUT terminals. | ||
| Recording | yy[ON]: Enable the function. | |
|
| yy[OFF]: Disable the function. | |
|
|
| |
| LED Brightness | Specify the brightness of the level meters. | |
| yy[HIGH], [LOW] | ||
|
| ||
|
|
| |
| Select the type of signal that will be used when outputting | ||
| signals. |
| |
|
| yy[LEVEL A], [LEVEL B] | |
|
| Select the voltage at which to display the low battery (voltage decline) | |
|
| warning for the DC power battery. | |
|
| yy[11V], [12.5V], [13.5V], [15V] | |
| Low Battery Alert | The | indicator will turn red and blink before the battery charge is |
|
| empty. |
|
|
| Replace the battery when the battery charge is low and “Interface | |
|
| Unit: Low Battery Alert” is displayed. | |
|
|
|
|
12VQT5K48 (ENG)
