∙If the vent or rotating parts such as the swivel, swivel ring or ball joint require cleaning, use a soft bristle brush.
Weekly:
∙Handwash the headgear. It may be washed without being disassembled.
Reprocessing the mask between patients
This mask should be reprocessed when used between patients. Cleaning, disinfection and sterilization instructions are available from the ResMed website, www.resmed.com/masks/sterilization. If you do not have internet access, please contact your ResMed representative.
Troubleshooting
Problem/possible cause | Solution |
|
|
Mask is too noisy. |
|
Vent is blocked or partially | If the vent requires cleaning, use a |
blocked. | soft bristle brush. |
Elbow inserted incorrectly. | Remove the elbow from the mask |
| and then reassemble according to |
| the instructions. |
| Ensure that the swivel ring on the |
| elbow has not been inserted too far |
| into the cushion. |
Mask is leaking. | Refit or reposition your mask. |
| Readjust the back strap to bring the |
| mask closer to the face and improve |
| your seal. |
| Check that your mask is assembled |
| correctly. |
6