Panasonic DP-7000, DP-6000 manual Select Enter/Next

Use the ruler markings surrounding the Document Glass to set the area of the original for scanning.

Select Cancel to cancel the settings.

To change the value, select Enter/ Next to move to the value you want.

Chapter 3 Loading Documents for information on how to load documents.

Set the document orientation correctly because if it is different from the orientation of original loaded, XY is different and their reduction or enlargement becomes different as a result.

See 5-10: Selecting the Original Orientation (Original Orientation) for details.

You cannot select Save until you have entered all the measurements for the document and paper size. Some features cannot be selected together with this feature. See Appendix B: Possible Combinations of Features for details.

Basic Features

Check that there is a button on the left of Original Size under Y. Enter the length of the document by using the keypad.

For example, enter "210 mm".

Select Enter/Next.

The button moves to the left of Copy Size under Y.

Select the value of X in the same way as explained from Steps	4
5 to 6.

The machine calculates the XY ratio and it is displayed.

Load the original in the orientation of Head to Top, or Head to Left.

Select the corresponding document orientation of the original loaded.

Select Head to Top or Head to Left.

Select Save thrice.

Select other features if necessary.

Enter the required number of sets by using the keypad and press Start.

The copies are made according to the specified copy sizes.

4-4 Reducing/Enlarging the Length and Width (Independent X-Y%) 53