Copy Features
42
Using the Erase Feature
Use the following procedure to make a copy using the Output feature:
1. If the DP-C106 is in printer mode, press the Copy button to enter copy
mode.
2. Press the Clear All button to restore default settings.
3. Position the original on the Document Glass or in the ADF.
For more information on positioning originals on the Document Glass and
Using the ADF, go to the Basic Copying.
4. Press the Advanced Features button. Advanced Features selection is
displayed on the Copier Screen.
5. Use the ( ) ARROW buttons to highlight the Erase feature.
6. Press the Select button. Erase selection is displayed on the Copier
screen.
7. Use the ( ) ARROW buttons to highlight one of the following:
• ON, to turn the Erase feature On.
• OFF, to turn the Erase feature Off.
8. Press the Select button. One of the following happens:
• If you selected OFF, Advanced Features selections will redisplay
on the Copier Screen. Skip to step 10.
• If you selected ON, Erase value selection is displayed on the
Copier Screen. Use the ( ) ARROW buttons to highlight an
erase dimension. Use the Numeric Keypad to enter an erase value
between 0 mm and 50 mm.
If you enter an incorrect value, press the Clear button to delete it.
Horizontal
Vertical
Center