Clearing Area 5 Jams Problem Solving
87
Clearing Area 5 Jams
Perform one of the following procedures when the message CLEAR JAM IN
AREA 5 is displayed on the Control Panel.
• If you do not have the Duplex Unit/Kit option installed perform the
Clearing the Fuser Area procedure below.
• If you have the Duplex Unit/Kit option installed, go to the Clearing the
Upper Inverter.

Clearing the Fuser Area

1. In order to access Area 5, pull open the Fuser Area Access Cover.
WARNING
The Fuser may be hot. Use care when reaching into the Fuser area.
2. To release any paper, lift the Green Lever as shown, and gently pull the
paper in the direction of the arrow.