Features Menus More 2 Chapter

Select the cover type.

5 Select “OK”.

 

 

 

 

 

 

 

 

Blank

Not copied on the cover.

 

 

 

zFor the following procedure, refer to steps 5

 

 

 

 

 

 

 

 

Copy

Copied on the cover.

to 6 of Basic Operation for the 2-Sided

 

 

 

 

Copy Mode (see page 40).

zWhen “Blank” is selected for the cover type,

zWhen the fold position does not match with

up to 56 originals can be placed on the ADF.

the center position of the copies, set the

Select “Cover” to select a paper.

binding margin. Refer to General Settings

 

 

 

 

in the Operating Instructions (For Function

 

 

 

 

Parameters) of provided CD-ROM.

 

 

 

 

zThe stapled copies are delivered to the

 

 

 

 

Saddle Tray of the 1Bin Saddle-Stitch

 

 

 

 

Finisher as shown below.

 

 

 

 

 

 

 

 

 

 

 

zWhen changing paper for copies other than the cover, select “Copy”. If the paper of desired size is available on the tray, the display changes.

Select a paper size from the display.

4 Select “OK” to exit the cover settings.

Staple Position

Saddle Tray

44