5 Select “XY” to set the same value for X
and Y, or “X” or “Y” to set a different value for X and Y.
XY Select to set the same erasing width for all sides.
XSelect to set the erasing width for the right and left sides.
YSelect to set the erasing width for the top and bottom sides.
6 Enter the erasing width with “S” and
“T”, or the Keypad, and then select “OK”.
zThe erasing width can be set in 1 mm increments from 5 mm to 99 mm.
7 Enter the desired number of copies.
8 Press the Start key.
zWhen copying from the Platen Glass, place the next original, and follow the instructions described on the Touch Panel Display. (The instructions are displayed only when the Sort mode other than “Non Sort” is selected.)
zAfter finishing copying, press the Reset key to return to the initial screen of the currently active mode.
Features Menus More 2 Chapter
57