Panasonic DVD-F84 Settings, Player, Changing the speaker setting to suit your speakers

∫ “Display” tab

Menu Language	§5≥ English	≥ Français		≥ Español
	§6≥ English	≥
	§7≥ English	≥ Français	≥ Deutsch ≥ Italiano ≥ Español ≥ Português ≥ Svenska ≥ Nederlands
On-Screen Messages	≥ On	≥ Off
∫ “Others” tab
FL Dimmer	≥ Bright	≥ Dim
Changes the brightness of the unit’s display.	≥ Auto:The display is dimmed during play, but brightens when you perform some operations.
Auto Power Off	≥ On: The unit switches to standby mode after about 30 minutes in the stop mode, irrespective of the SLEEP setting.
	≥ Off
HighMAT	≥ Enable	≥ Disable (Unable to use the HighMAT function.)
QUICK SETUP	≥ Yes	≥ No
Re-initialize Setting				➜
	≥ Yes: The password screen is shown if “Ratings” ( page 12) are set. Please enter the same
This returns all values in the Setup menus to	password. After “INIT” on the display disappears, turn the unit off and on again.
the default settings.	≥ No
§1 Language options			§4	If the language selected for “Audio” is not available, subtitle appear in
[U.S.A.\and\Canada] : French and Spanish				that language (If available on the disc).
[Asia] : Chinese			§5	[U.S.A.[and\Canada[
\Australia\and\N.Z.] :			§6	[Asia]
French, German, Italian, Spanish, Portuguese, Swedish and Dutch			§7	\Australia\and\N.Z.]
§2 The original language designed on the disc is selected.
§3 Input a code number referring to the table on page 15.

[DVD-F87]only]

Changing the speaker setting to suit your speakers

When you connect with AUDIO OUT 5.1 ch (➜ page 4) and select “Multi-channel”(➜page 12, “Speaker Setting” in “Audio” tab)

settings

	Front (L)		Center	Front (R)
	a	b a c		a
Exit	L	ms	C dB	R

Delay time (b)

(Effective when playing multi-channel audio)

If either distance d or f is less than e, find the difference in the relevant table and change to the recommended setting.

the player

		0.0		0
	Exit			dB	SW
	Test
				0
Test	LS	dB	ms	dB	RS
signal		0	0.0	0

(LS)	— Surround — (RS)		Subwoofer
a c	b	c a	c a

Speaker presence and size (a)

Icon examples:

Surround speaker (LS)

LS LS

: Recommended placement

L C R

d e

SW

f

LS RS

d Center speaker

Difference	Setting
Approx. 34 cm (11⁄10 feet)	1.0 ms
Approx. 68 cm (21⁄5 feet)	2.0 ms
Approx. 102 cm (33⁄10 feet)	3.0 ms
Approx. 136 cm (42⁄5 feet)	4.0 ms
Approx. 170 cm (51⁄2 feet)	5.0 ms
f Surround speakers
Difference	Setting
Approx. 170 cm (51⁄2 feet)	5.0 ms
Approx. 340 cm (11 feet)	10.0 ms
Approx. 510 cm (161⁄2 feet)	15.0 ms

Changing

Large Small No

≥Large: Select when the

speaker supports low-frequency (under 100 Hz) reproduction.

≥Small: Select when the speaker does not support low-frequency reproduction.

If the subwoofer is set to “No”, the front speakers will automatically be set to “Large”.

Channel balance (c)

1.Select “Test” and press [ENTER]. A test signal is output.

Front (L)_—)Center_—)Front (R)

:;

Surround (LS)(—————=Surround (RS)

2.While listening to the test signal, press [3 4] to adjust the volume of the center and surround speakers so they are the same apparent volume as the front speakers (s6 to r6).

(The front speakers cannot be adjusted here.)

3.Press [ENTER].

The test signal stops.

≥No signal is output for the subwoofer. To adjust its volume, play something, then return to this screen to adjust to suit your taste.

To finish the speaker setting

Press [3 4 2 1] to select “Exit” and press [ENTER].

RQT7292

13