STEP 1 The remote control
∫Batteries
R6/LR6, AA,
≥Insert so the poles (i and j) match those in the remote control.
≥Do not use rechargeable type batteries.
Do not:
≥mix old and new batteries.
≥use different types at the same time.
≥heat or expose to flame.
≥take apart or short circuit.
≥attempt to recharge alkaline or manganese batteries.
≥use batteries if the covering has been peeled off.
Mishandling of batteries can cause electrolyte leakage which can damage items the fluid contacts and may cause a fire.
Remove if the remote control is not going to be used for a long period of time. Store in a cool, dark place.
∫Use
Aim at the remote control sensor, avoiding obstacles, at a maximum range of 7 m (23 feet) directly in front of the unit.
STEP 2 Connection to a television
≥Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit.
≥Do not connect through the video cassette recorder. Due to copy guard protection, the picture may not display properly.
≥Turn off all equipment before connection and read the appropriate operating instructions.
≥Connect the terminals of the same color.
Television
WITH | VIDEO IN or S VIDEO IN | WITH | COMPONENT VIDEO IN | ||
AUDIO IN | VIDEO | or | S VIDEO | AUDIO IN | COMPONENT |
R L | IN |
| IN | R L | VIDEO IN |
S video cable§
Audio/video cable (included)
§When using this connection, the audio cable (red and white plugs) should also be 
connected.
Audio/video cable (included)
|
|
|
|
|
|
| Video |
|
|
|
|
|
|
| |
Not used |
|
|
|
|
| ||
|
|
|
|
| cables | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
To enjoy progressive video
Connect to a progressive output compatible television.
1Select “Enable” in the progressive
output setting in QUICK SETUP (➜ see below).
2Set “Video Output Mode” in Picture
Menu to “480P” (➜ page 9).
All Panasonic televisions with 480P input connectors are compatible. Consult the manufacturer if you have another brand of television.
| You can connect the audio cable to the 2- |
|
channel audio input terminals of an |
|
| analog amplifier or system component to | Back of the unit |
enjoy stereo. |
\U.S.A.,\Canada\and\units\with\PX\printed\on\the\outer\packaging\
≥Select “Darker” from the “Black Level Control” in the “Video” tab (➜ page 10).
The remote control/Connection to a television/QUICK SETUP
∫Connect the AC power supply cord last
AC power supply cord (included)
To household AC outlet
AC IN
Conserving power
This unit consumes a small amount of power, even |
|
when it is turned off (1 W). To save power when the |
|
unit is not to be used for a long time, unplug it from | [For[Saudi]Arabia\ |
the household AC outlet. | |
[The\Middle\East\ |
|
≥Use the AC power supply cord that matches the |
|
socket for the area you live in. |
|
For units with PX printed on the outer packaging
If the power plug does not fit your AC outlet, use the power plug adaptor (included).
If it still doesn’t fit, contact an electrical parts distributor for assistance.
∫ Enjoying |
Amplifier with a |
Coaxial cable |
combination |
COAXIAL IN |
Change “PCM Digital Output”, |
“Dolby Digital”, “DTS Digital |
Surround” and “MPEG§” in “Audio” |
tab (➜ page 10). |
Back of the unit |
§MPEG: [The\Middle\East,\South\Africa,\Russia,\Australia\and\N.Z.] |
STEP 3
QUICK SETUP
Turn on the television and select the appropriate video input on the television.
RQT7240
AV ENHANCER FL SELECT OPEN/CLOSE
ADVANCED
SURROUNDPICTURE MODE REPEAT
DIRECT NAVIGATOR | PLAY LIST |
TOP MENU | MENU |
| ENTER |
DISPLAY | RETURN |
SUBTITLE AUDIO ANGLE/PAGE SETUP
1 2
SETUP
Power ON. Shows QUICK SETUP screen.
To change these settings later
3
RETURN
ENTER
Follow the message and make the settings.
4
ENTER
Press to finish
QUICK SETUP.
5
SETUP
Press to exit.
4 | PLAY MODE SLEEP | ZOOM GROUP |
Select “QUICK SETUP” in “Others” tab (➜ page 10).
