Playback
Turn on the TV and select the correct video input.
Press ^.
Place a disc or connect a USB device.
•If this unit is not switched to the USB mode when connecting the USB device, press USB and press w q to select the item.
Press e r w q to select the item and press OK.
•Depending on the disc, playback may start automatically.
(JPEG only)
•When you press PLAY/PAUSE q/h instead of OK, you can start the slide show.
Stopping playback
Press STOP g.
The stopped position is memorized.
Power Resume function
Press PLAY/PAUSE q/h to restart from this position.
This position is memorized even after power outage (Power Resume). However, if the restart position is misaligned or depending on the media and playback conditions, the unit may not operate normally.
NOTE
•Screen saver will start automatically if the media playback is stopped and the menu is closed for about 5 minutes.
•The player will automatically switch to Power Standby mode if you do not press any buttons for about
25 minutes after the media has stopped playing.
•During playback of DTS source, there will be no sound from the speakers. Select a different audio source (e.g. Dolby Digital).
Or please connect the unit to an AV receiver that can decode DTS via an HDMI terminal, and set “Audio Out” to “Bitstream” ( page 11).
Control guide
Operations Getting started
Playback
VQT5C22
9