Getting Started
Fitting the Battery
Fit a fully charged battery pack. If the |
| ||
battery pack is not fully charged then it |
|
|
|
must be charged as described in the |
|
|
|
“Charging the Battery” section. |
|
|
|
First, remove the battery cover by |
|
|
|
pressing where indicated and sliding |
|
|
|
the cover downwards (1). Ensure that |
| ||
the battery locking mechanism is |
| ||
|
|
| |
located to the left, then insert the top of |
|
|
|
battery (label uppermost) into the |
|
|
|
battery recess (2). Place the base of the |
|
|
|
battery into the phone and push the |
|
|
|
sliding mechanism to the right locking |
|
|
|
the battery into place (3). Replace the |
|
|
|
battery cover, sliding upwards until it clicks into position (4). |
| ||
Removing the Battery |
|
|
|
First, remove the battery cover by | |||
pressing where indicated and sliding |
|
|
|
the cover downwards (1). |
|
|
|
Push the sliding mechanism to the left to release the battery (2). The battery can now be removed from the phone
(3).
Charging the Battery
Connecting the AC Adaptor
The battery pack must be attached to the phone before the AC Adaptor is connected. Insert the AC Adaptor plug into the base of the phone (1).
Note: DO NOT force the connector as this may damage the phone and/or the AC Adaptor.
Connect the AC Adaptor to the mains power supply (2). Indicator will light and charging starts.
2
