84
Settings
Codes

Changing the phonecode

You can change the phonecode for enhancing security. See “SIM
lock” on page86.
d Main menu > Settings > Security > Codes > Change
phonecode
1. Enter a new phonecode 7 [5] (OK)
2. Enter the new code to verify 7 [5] (OK)
To change the phonecode, enter the current phonecode, then repeat the
step1-2.

PIN control

The PIN protects your phone against unauthorised use. If you
enable the PIN, you will be prompted to enter the PIN every time the
phone is switched on.
d Main menu > Settings > Security > Codes > PIN control
1. Enter the PIN code 7 [5] (OK)
2. [5] (Change) to switch on/off 7 [6] (OK)
Note:Your phonecode must be 6 to16 digits. You are advised to write down
your phonecode. If the phonecode is entered incorrectly 10times, the phone
will cease to operate. Contact your local Panasonic service centre.
Note:If the PIN code is entered incorrectly several times (depends on your
SIM card), the PIN will be blocked. Contact your service provider for PUK
code. If the PUK code is entered incorrectly 10times, your SIM card will be
blocked permanently.