Cleaning the blade
1. Brush off any | 2. Remove the |
hairs from the | blade and brush |
clipper and | off the hairs |
from around | from the blade |
the blade. | edge. |
Lubrication
1.Apply a few drops of the oil to the space between the stationary blade and moving blade.
•Apply the oil to the clipper before and after each use.
2.Set the dial to “2.0” and then remount the blade on the clipper.
3.Brush the hairs out from between the stationary blade and the moving blade while pressing down on the cleaning lever to raise the moving blade.
