upward to let it fully dry. (Fig.16)

4)Apply a few drops of the oil to the points indicated by the arrows. (Fig.19)

5)Remount the blade on the clipper body.

(WARNING: Detach the clipper ) from the AC adaptor before cleaning it in water.

BIf cleaning with brush

1)Use the cleaning brush to brush off the cut hairs from the clipper body and from around the blade. (Fig.17)

2)Remove the blade and brush off the cut hairs from the blade edge.

3)Brush the cut hairs out from between the fixed blade and the moving blade. Press down on the lever for cleaning in order to raise the moving blade, and brush the cut hairs out from between the blades. (Fig.18)

4)Apply a few drops of the oil to the points indicated by the arrows. (Fig.19)

5)Remount the blade on the clipper body.

Important notice regarding environmental protection

The built-in rechargeable Nickel- Metal Hydride battery contains substances which may be environmentally harmful. Before discarding your eletric hair clipper please remove the battery and be sure that it is disposed of in an environmentally friendly way.

<How to remove the built-in rechargeable battery>

Disconnect the clipper from the outlet when removing the battery. Fully discharge the battery.

1)Remove the blade A and then remove the three screws. (Fig.20)

2)Remove the bodycorner (housing). (Fig.21)

3)Remove the four screws. (Fig.22)

4)Remove the blade attachment mounting Q and the lower cover R, and then pull out the motor S. (Fig.23)

5)Remove the plug mounting T, and then take out the nickel metal hydride battery. (Fig.24)

(Be careful not to short the + and - ) terminals of the battery after removing it.

Specifications

Power source : 230V AC, 50Hz

Motor voltage : 1.2V DC

Charging time : 12hours

8