S P E C F I L E
Ceiling mount bracket for high ceilings
ET-PKE200H
escriptionD
This ceiling mount bracket is used when mounting a Panasonic’s applicable projector to high ceilings.
NOTE: This ceiling mount bracket cannot be used by itself. Combine it with the optional bracket assembly.
Specifications | Vertical correction angle: | +10°, |
| Horizontal slant correction angle: | ±15° |
| Horizontal turn correction angle: | ±10° |
| Dimensions (W × H × D): | 264 × 864 – 1,464 × 264 mm |
|
| |
| Weight: | Approx. 5.2 kg* (11.5 lbs*) |
| Applicable bracket assembly: |
|
|
| * Average value. May differ depending on models. |
Parts Projector mount bracket A (pole included) . . . . . 1 Projector mount bracket B (pole included) . . . . . 1 Pole joint bolt . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Washer (M6) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Hexagonal nut (M6) | 1 |
Snap pin | 1 |
Screws (M3 × 10) | 4 |
Safety wire | 1 |
C a u t i o n :
•Mounting should be done by a qualified technician.
•Make sure that the mounting (ceiling) area has sufficient strength.
•Read the enclosed mounting instructions thoroughly before starting.
•Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque wrench and tighten screws to the torque specified in the instructions.
•When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
Dimensions
∅54
(
489.5
The illustration shows the ceiling mount bracket when it is combined with the
| 185.5 | 184.5 |
|
|
Projector |
|
| ||
|
|
| ||
|
| 3/8) |
| |
|
|
|
| |
(13/32 × 9 /16 ) |
| 60 | (2- |
|
|
|
| ||
|
|
| 120 | 23/32) |
|
|
|
| (4- |
|
| 60 | 3/8) |
|
|
|
| (2- |
|
| 60 | 60 |
|
|
| ( | ( |
|
|
|
| 120 |
|
|
|
| unit : mm (inch) | ||
|
| NOTE: This illustration is not drawn to scale. | ||
As of April 2012 | 1 / 1 | |
|
|
|
SFL12A009
