Connections

Connecting to the DIGITAL LINK compatible device

■■Connections

When connecting to the DIGITAL LINK

When connecting to the projector that is not

compatible projector

DIGITAL LINK compatible

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

DIGITAL LINK

compatible projector

Attention

HDMI cable (commercially available)

Not DIGITAL LINK compatible projector

The twisted-pair-cable receiver of other manufacturer

*Names of the DIGITAL LINK terminals may be different for each manufacturer.

zzWhen connecting to the projector using the twisted-pair-cable receiver of other manufacturer, do not use another twisted-pair-cable transmitter between the twisted-pair-cable receiver of other manufacturer and the projector.

The images and sounds may be interrupted or become unstable.

zzDo not use the switching hub between the interface box and DIGITAL LINK compatible projector, and between the interface box and twisted-pair-cable receiver.

zzRequest the specialized technician or your dealer for wiring work of the cable for DIGITAL LINK. If the work is not properly conducted, the cable transmission characteristics do not meet, and the images and sounds may be interrupted or become unstable.

zzUse the cable that conforms with the following conditions.

•Compatible to the CAT5e or a higher standard

•Shield type (including the connector)

•Straight wire connection

•Single wire

zzWhen installing the cable, confirm that the cable specification satisfies the characteristics of CAT5e or higher by using a cable tester or a cable analyzer.

When a relay connector is used in the middle, measure in a condition that the relay-connector is included. zzThe interface box becomes easier to get affected by the internal noise, as well as the external noise. Therefore,

install and use the cable without being wound as much as possible.

zzDo not pull the cable with a strong force. In addition, do not bend or fold forcedly.

zzDo not bind with other cables, especially the power cable. Keep the distance from other parallely set cables as far as possible.

zzWhen connecting the interface box to the DIGITAL LINK compatible projector, open the DIGITAL LINK status menu of the projector after connecting the cable. Confirm that the signal quality is -12 dB or lower.

ENGLISH - 21