On-screen menu navigationOn-screen menu navigation

The on-screen menu (Menu) is used to perform various settings and adjustments of the interface box.

Navigating through the menu

■■Operating procedure

button

1) Press the <MENU> button on the control panel.

zzThe main menu screen is displayed.

ET-YFB100

 

 

DIGITAL INTERFACE BOX

 

 

HDMI 1

 

INPUT SELECT

 

HDMI 2

 

 

 

COMPUTER 1

 

PICTURE

 

 

 

COMPUTER 2

 

 

 

S-VIDEO

 

POSITION

 

VIDEO

 

LANGUAGE

OPTION

zzWhen the interface box is connected to the DIGITAL LINK compatible projector and operated by a remote control, the method to display the main menu screen varies depending on the projector model.

•When DIGITAL LINK is selected from the main menu of the projector

•When the Digital Interface Box menu is selected from the network menu of the projector

For the operation procedures, refer to the

Operating Instructions of the projector used.

2) Press ▲▼ to select an item from the menu item.

zzThe selected item is highlighted in yellow.

zzThe sub-menu items of the selected main menu are displayed on the right side.

ET-YFB100

 

DIGITAL INTERFACE BOX

 

 

SYSTEM SELECTOR

AUTO

INPUT SELECT

 

CLAMP POSITION

 

 

 

 

+24

 

 

 

DIGITAL CINEMA REALITY

PICTURE

POSITION

LANGUAGE

OPTION

3) Press the <ENTER> button.

zzThe sub-menu items become selectable.

4)Press ▲▼ to select a sub-menu item, and press ◀▶ to change or adjust

settings.

zzFor some items, press ◀▶ to display an individual adjustment screen with a bar scale as shown in the following diagram.

CLAMP POSITION

 

 

 

 

+24

 

 

 

zzIf an item does not have any further information but only an item name, pressing the <ENTER> button displays the next screen, and detailed settings become possible.

Note

zzWhen the <RETURN> button or the <MENU> button is pressed when the menu screen is displayed, the screen returns to the previous screen.

zzThe remote control may not have the return button, depending on the DIGITAL LINK compatible projector model connected to the interface box.

zzSome items cannot be adjusted and some functions cannot be used depending on the signal to be input to the interface box. The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected.

zzSome items can be adjusted even if signals are not input.

zzIndividual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.

zzFor menu items, refer to “Main menu” ( page 28) or “Sub-menu” ( page 28).

zzWhen 3D signals are input, the interface box menu is not displayed. To change the setting of the interface box, input the 2D signal or operate without inputting any signal.

zzWhen 3D signals are input, all setting items of the interface box are disabled.

zzThe cursor color depends on the [OSD DESIGN] ( page 36) settings on the menu. The selected item is displayed with the yellow cursor by default.

■■To reset adjustment values to the factory default

If the default button on the remote control is pressed, the values set and adjusted in the sub- menu items will be restored to the factory default settings.

Press the default button on the remote control.

zzThe operation varies depending on the displayed screen.

•When the sub-menu screen is displayed The displayed sub-menu items are restored to the factory default settings.

•When the individual adjustment screen is displayed

Only items during adjustment are restored to the factory default settings.

CLAMP POSITION

 

 

 

 

+24

 

 

 

ENGLISH - 27