Checking the image

Checking the image

Confirm the connections of the external device ( page 18) and the AC adaptor ( page 23) and then turn on the power ( page 24). Select the projecting image, and confirm that the selected image is projected from the projector.

Select the input signal

Select an input signal.

1) Turn on the external device.

zzTurn on the external devices such as a projector and a Blu-ray disc player.

zzOperation may be required at the external device side, depending on the connecting external device. Refer to the operating instructions of the external devices.

2) Press the DIGITAL LINK button on the remote control of the projector or press the input selection button of the projector body to select the DIGITAL LINK input.

zzThe operation method may vary depending on the projector.

3)Press the <HDMI 1> button, the <HDMI 2> button, the <COMPUTER 1> button, the

<COMPUTER 2> button, the <S-VIDEO> button, or the <VIDEO> button on the control

panel of the interface box.

zzThe image of the signal being input in the selected terminal is projected.

Attention

zzImages may not be projected properly depending on the external device, or Blu-ray disc or DVD to be played. Set the [SYSTEM SELECTOR] ( page 30) of [PICTURE].

ENGLISH - 25