BEFORE USE
Wrapping the cuff
The cuff can be used on either upper arm. This section shows an example of wrapping the cuff on the left arm.
**The difference in blood pressure between left and right arm may be around 10 mmHg. Be sure to always use the same arm. It is recommended to use the arm with the higher blood pressure.
Cuff socket | 1. Insert the cuff plug into the cuff socket all the way in. |
English
Align the tube pointing toward the middle finger.
Approx. 1 inch
(2 to 3cm)
hook and loop fastener
Points when wrapping
Be sure to always wrap on the same position by using the guide.
(if your weight / arm circumference did not change
significantly.)
1
2
3
2.Fit the cuff to the upper arm.
●● Fit the preformed cuff onto the upper arm with the direction mark at the inner side.
●● Wrap the cuff on bare skin.
3.Wrap the cuff.
●● Align the tube pointing toward the middle finger.
●● Align the rotating part of the tube to the
line extended from the middle finger.
●● Set apart 1 inch (2 to 3cm) from the elbow joint.
●● Wrap the cuff with a gap of 1 or 2 fingers.
Be careful that the cuff is not too tight. ●● Press the hook and loop fastener down
well to fasten the cuff.
The cuff can be used on either upper arm. <Example for wrapping on the right arm.>
12
