Panasonic EW-BU35 operating instructions Taking a reading Measuring/Recording measurements, Start

HOW TO USE

Taking a reading (Measuring/Recording measurements)

Please start taking a reading under the condition that the power is off.

Start

	1.	Press				.
		After the					has been lit, the cuff
				entire display
		will be pressurized and measurement will be
		taken automatically.
		●● The pressure value and the time will be
		displayed.
		●● The		mark will flash and the					unit will
		beep with the pulse, detected during
		pressurization.
		After the measurement is completed, the unit
Finish
		will beep, and the blood pressure value and
		pulse rate will be displayed.
		* It will beep 4 times.
		●● "	"		and the graph " " are blinking.
		For how to see the graph, refer to page 16.
		●● According to the measurement result,
		safety/warning indicators may be
		displayed. For details, refer to page 15, 16.
Memory	2.	To store the measured values.
		press						.
		●● "	"		will go from flashing to being
		steadily lit.
		●● The memory number, measurement date,
		and time are alternately displayed.
		●● If you do not press								, the unit
		will shut down automatically after approx.
		5 minutes.
	3.	To complete the measurement, press
					.

English

●● This unit can store a maximum of 270 measurement values.

●● When exceeding 270 stored measurements, stored data will be overwritten, beginning with the oldest data.

14