V. MAINTENANCE
WARNING
To avoid severe personal injury, always remove the battery pack from the wood saw before starting any maintenance procedure.
CAUTION:
To assure product SAFETY and RELIABILITY, servicing should be performed by an authorized service center. Always insist on genuine Panasonic replacement parts.
Removing Blade
CAUTION:
The blade will be hot right after cutting. Be sure to let the blade cool down before removing it.
Follow these steps: (See. Fig.14)
1.Remove the battery pack from the wood saw. 2.Hold the spindle lock button down. This prevents
the blade from rotating.
3.Use the provided hex wrench to loosen the hex bolt.
NOTE:
Keep the hex wrench in the storage slot on the wood saw’s body when not using it.
4.Remove the hex bolt and outer washer.
5.Use the lower guard lift lever to retract (open) the lower guard.
6.Carefully remove the blade. 7.Clean the wood saw if necessary.
CAUTION:
Be careful to avoid cutting your hands on the blade.
•When disposing of a blade, secure it inside heavy or corrugated paper. This will help prevent anyone from being cut by the discarded blade.
Place the inner washer with
Inner washer | |
Lower guard | |
Spindle lock |
|
button |
|
| Outer washer |
| Place the protrusion of |
Hex bolt | the outer washer into the |
position of the washer. | |
Lower guard lift lever | Loosen | |
Tighten | ||
| ||
| Fig. 14 |
- 14 -
