Lamp Indications
Green Lit
Charger is plugged into the AC outlet.
Ready to charge.
Green Flashing Quickly
Charging is completed. (Full charge.)
Green Flashing
Battery is approximately 80% charged (Usable charge.
Green Lit Now charging
Orange Lit
Battery pack is cool.
The battery pack is being charged slowly to reduce the load on the battery.
Orange Flashing
Battery pack is warm. Charging will begin when temperature of battery pack drops.
If the temperature of the battery pack is
Charging Status Lamp
Left: green Right: orange will be displayed.
Both Orange and Green Flashing Quickly | |||
Charging is not possible. Clogged with dust or malfunction of | |||
the battery pack. | |||
X.MAINTENANCE |
| CAUTION: | |
|
| 4. Remove the blade and brush off any dust. | |
|
| To avoid injury or damage to the unit, never | |
WARNING |
| ||
To avoid severe personal injury, always remove |
| immerse any part of the tool in a liquid. | |
| Transparent Guard | ||
the battery pack from the tool before starting any |
| ||
|
| ||
maintenance procedure. |
|
| |
|
| WARNING | |
CAUTION: | |||
| If the guard is cracked, or is broken, take the tool | ||
To assure product SAFETY and RELIABILITY, |
| to an authorized service center for replacement. | |
servicing should be performed by an autho- |
| Do not attempt to operate tool. It could result in | |
rized service center. Always insist on genuine |
| serious personal injury. | |
Panasonic replacement parts. |
| Never use your tool with a damaged transparent | |
Cleaning Tool |
| guard or without the transparent guard installed. | |
| Flying chips could result in serious injury. | ||
Keep your tool clean for good cutting perform- |
| ||
|
| ||
|
| ||
ance, and to help keep it safe to use.
Follow these steps:
1.Remove the battery pack from the tool.
2.Wipe the tool with a dry, soft cloth. Do not use a wet cloth or cleaning liquids.
They could damage the tool’s finish.
3.Be sure to rub off any oil or grease which could make the tool slippery or hard to handle.
- 19 -
