3 DISASSEMBLY/ASSEMBLY INSTRUCTIONS
■HOW TO DISASSEMBLE KEYLESS CHUCK.
Ref. No. 1A | Procedure 1A | Removal of the Keyless Drill Chuck. | |
|
| 1. Set the clutch handle to position | and select "LOW" |
position.
2. Turn the lock collar counterclockwise direction to open the chuck jaws.
3. Use a screwdriver to turn the chuck fastening screw inside the chuck clockwise direction of the arrow, and remove the screw. (See Fig.1)
NOTE :
| If the chuck fastening screw will not come loose, insert the | |
| allen wrench into the chuck and lightly tap in the clockwise | |
| direction with a hammer to tighten the chuck, and then loosen | |
Fig.1 | the chuck fastening screw. (See Fig.2) | |
4. Insert the allen wrench into the chuck, and turn counterclockwise | ||
| ||
| direction in the arrow with holding the unit by the vise to remove | |
| the chuck. (See Fig.3) |
Fig.2
Fig.3
3
