Ref. No. 2C | Procedure 2A → 2B → 2C | Removal or attachment of the Gear Box Block. | |
|
| (Removal) | |
|
| 1. | Turn the thrust plate to remove. |
|
| 2. | The internal parts of gear box block can be removed one after |
|
| another. (See Fig.6) |
(Attachment)
1. Start from inserting 6 pins into the driving block as shown in the Fig.7.
2. Assemble the other parts in reverse order as shown in the Fig.6.
NOTE :
Carrier, Ring Gear, and Ring Gear A have their own correct directions for proper reassembly.
3. Insert 2 pieces of steel ball into each 6 holes of gear case.
4. Set clutch plate and clutch spring.
NOTE :
Clutch plate has its own correct direction for proper reassembly.
Fig.6
Fig.7
5