![](/images/new-backgrounds/1210114/2101147x1.webp)
Ref. No. 1C | Procedure 1A → 1B → 1C | Removal of Motor Mounting Base. | |
|
| 1. | To remove the ring gear, unhook right and left |
|
| side of the projections using a flat screwdriver. | |
|
| 2. | After removing the ring gear, the internal parts |
|
| can be remove one after another. | |
|
| 3. | Loosen 3 screws tightened with the motor |
|
| mounting base. | |
|
|
|
|
Ref. No. 1D | Procedure 1A → 1B → 1D | Removal of Gear Box Assembly. |
1. Hold the driving carrier as illustrated. Compress the assembly and remove the pin.
2. Take out the driving shaft assembly and the gear case assembly from the shaft of the driving carrier.
NOTE :
Make sure not to lose the pin and the connect piece.
4