■HOW TO DISASSEMBLE MAIN UNIT.
Ref. No. 2A | Procedure 1A→1B→2A | Removal of the switch. | |
|
| 1. | Take out the heat sink from the housing by something like a plier. |
|
| 2. | Take out the battery holder from the housing. |
|
| 3. | Remove the trigger cover. |
|
| For assembling |
|
| NOTE: |
|
| Make sure to set the trigger cover into the groove of housing. |
|
|
|
|
|
|
Ref. No. 2B | Procedure 1A→1B→2A→2B | Removal of the motor assembly. |
|
| 1. Hitch the brush spring to the frame by something like a forceps and |
|
| take the motor brush assembly with the switch out from the motor |
|
| assembly. |
|
| 2. Take out the rotor and the current plate from the motor case. |
|
| For assembling |
|
| NOTE: |
|
| Make sure to return the spring into the groove of the motor brush. |
|
| Make sure to align the groove of motor case and the groove of |
|
| current plate. And set the largest groove of the motor case onto |
|
| the boss of housing. |
|
|
|
4
