Grease
Dust Collection Cup (EY9X004)
*Drill bits of which diameter is 20mm above cannot be installed.
*Do not use the tool for cutting other than concrete, mortar and other ceramic materials. If used for cutting metal materials, the dust collection cup may be damaged by the metal chip heat.
1.Install a dril bit.
2.Pass the drill bit through A and fix the cup at B by matching with the shape of the support handle.
A B
Operation
Keep the dust collection cup in close contact with the wall surface during operation.
Removal
Hold the base of the dust collection cup for removal.
Please remove after thoroughly get- ting rid of the dust in the dust collec- tion cup.
Base
Storage
Do not store the dust collection cup in a compressed position. If kept in a compressed position, it may be impos- sible to return to the original shape.
. Maintenance
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile sol- vents for cleaning.
.Optional Attach- ment
| Can be used in: |
|
| ||
Optional | Hammer- | Drillring |
|
| |
ing mode | mode |
|
| ||
attachment |
|
| |||
Drill chuck |
|
| dia.1.5mm | 13mm (1/16" | |
|
| 1/2") |
| ||
EY9HX400E |
|
|
| ||
No | Yes | Wood drill |
| ||
|
|
| Metal drill |
| |
|
|
| Don't in hammering mode. | ||
|
|
| dia.2.5mm | 13mm (3/32" | |
|
|
| 1/2") | drill bit with | |
Hammer chuck |
|
| Masonry | ||
|
| straight shank | |||
EY9HX401E | Yes | Yes | |||
(for bricks, mortar, cinder | |||||
| block, Aired Light Concrete | ||||
|
|
| drilling only) | ||
|
|
| Wood drill |
| |
|
|
| Metalwork drill | ||
Chiseling |
|
| Light weight chiseling. | ||
attachment |
|
| |||
Yes | No | Peeling off tiles | |||
EY9HX402E | |||||
|
|
| Making ditch for plumbing | ||
|
|
| Basement trimming | ||
- 10 -
