CAUTION

Do not remove the memory card or perform any other operation (such as turning off the camcorder) during deletion. Also, be sure to use the provided AC Adapter, as the memory card may be corrupted if the battery becomes exhausted during deletion. If the memory card becomes corrupted, initialise it. ( pg. 24)

IMPORTANT

•Be sure to always use the same tape and memory card together as they were during recording; otherwise, the camcorder cannot recognize Tape and Memory Card IDs to perform NAVIGATION function properly.

•Check if an appropriate tape and memory card are loaded when the following messages appear: “NO ID ON TAPE OR CARD”, “UNABLE TO USE NAVIGA- TION”, “THIS MEMORY CARD IS NOT COMPAT- IBLE”.

•If you change the memory card while shooting on one tape, two memory cards will share the tape’s thumbnail images. We recommend that you use one memory card for one tape.

•NAVIGATION Search does not work if the current position is at a blank portion on the tape. Also, do not leave a blank portion partway through the tape when shooting; otherwise, NAVIGATION function does not work properly.

•Before shooting newly over a recorded tape, be sure to delete all thumbnail images of the previous recording from the relevant memory card.

•If you copy thumbnail images from one memory card to another via a PC, NAVIGATION Search does not work with the copied memory card.

E-Mail Clip Recording

You can make video clips from real-time camera image or recorded video footage and store them in a memory card as files which can be conveniently sent via e-mail.

TO MAKE VIDEO CLIPS FROM REAL-TIME CAMERA IMAGE

1 Load a memory card ( pg. 11). Set the VIDEO/ MEMORY Switch t to “MEMORY”, then set the Power Switch @ to “ ” or “” while pressing down the Lock button $ located on the switch.

2 Press E-MAIL6. “E-CLIP” appears and the camcorder enters the E-Mail Clip Record-Standby mode.

3 Press the Recording Start/Stop Button ! to start E-Mail Clip Recording.

4 Press the Recording Start/Stop Button ! to stop E-Mail Clip Recording. “COMPLETED” is displayed, then the camcorder re-enters the E-Mail Clip Record- Standby mode.

5 Press E-MAIL6 to end E-Mail Clip Recording. The normal screen reappears.

To view video clips stored on a memory card . . .

.....  pg. 18.

EN

TO MAKE VIDEO CLIPS FROM RECORDED VIDEO FOOTAGE

1 Load a memory card ( pg. 11) and cassette ( pg. 9). Set the VIDEO/MEMORY Switch t to

“VIDEO”, then set the Power Switch @ to “ ” while pressing down the Lock Button $ located on the switch.

2 Press 4/6 ! to start tape playback.

3 Press E-MAIL6. “E-CLIP” appears and the camcorder enters the E-Mail Clip Record-Standby mode.

4 Press SNAPSHOT 9 to start E-Mail Clip Recording.

5 Press SNAPSHOT 9 to stop E-Mail Clip Recording. “COMPLETED” is displayed, then the camcorder reenters the E-Mail Clip Record-Standby mode.

6 Press E-MAIL6 to end E-Mail Clip Recording. The normal screen reappears.

To cancel E-Mail Clip Recording . . .

..... after step 3, press E-MAIL6 again or press 5 7

to stop tape playback.

To view video clips stored on a memory card . . .

.....  pg. 18.

NOTES:

●Video clips are stored in 160 x 120-pixel format.

●Playback operation cannot be performed during E-Mail Clip Recording.

●If the end of the tape is reached in step 3, the E-Mail Clip Record-Standby mode will be automatically cancelled.

●The video clip files made with this camcorder are MPEG4 compliant, however, some MPEG4 files made with other devices may not be played back with this camcorder.

●240 x 176 size video clip files made with other devices or video clip files that are longer than 3 minutes cannot be played back with this camcorder. “UNSUPPORTED FILE!” is displayed.

●You can delete unwanted video clips ( pg. 20,

“Deleting Files”) or protect important ones from accidental erasure ( pg. 20, “Protecting Files”).

●Video noise may appear while viewing video clips in the LCD monitor or viewfinder, however, this noise is not present in the actual video clips stored on the memory card.

●You can also view video clips on your PC by using Windows® Media Player. Refer to the instructions of the PC and software.

Approximate recording time <GR-DX95/DX75>

MultiMediaCard (8MB)

8 min.

 

 

<GR-DX300/DX100>

 

 

 

SD Memory Card (8MB)

7 min.

 

 

•Approximate maximum recording time per video clip is 3 minutes.

22 ADVANCED FEATURES